| AXIS LASER STENCIL COMMAND CENTER®
FEATURES:
ENGINEERING AND DESIGN SERVICES:
- LASER CUT SMT STENCILS PERFORMANCE ENHANCED THROUGH THE AXIS
LASER STENCIL COMMAND CENTER®
- DATA EVALUATED BY OUR TECHNICAL STAFF TO ENSURE EACH LASER CUT
STENCIL ACHIEVES OPTIMAL PASTE RELEASE WITH AFTER REFLOW SUCCESS.
- EACH AXIS LASER STENCIL COMMAND CENTER® IS CUSTOM DESIGNED FOR
USE IN YOUR PRODUCTION ENVIRONMENT.
INDUSTRIAL GRADE PULSED ND:YAG LASER
- SELECTABLE PULSE WIDTHS FROM 50us TO 10 ms
- SELECTABLE PULSE RATE TO 4000 pps
- 1 MIL DIAMETER BEAM
- CNC-2000™ POSITIONING CONTROLLER
- (115 VOLT, 60HZ, 15 AMPS – DEDICATED – OR 220 VOLT, 50hz
–DEDICATED)
- HIGH VOLTAGE BRUSHLESS D.C. SERVO AMPLIFIER
SPECIFICATIONS:
- TABLE SIZE
- CUSTOM TABLE SIZES FOR YOUR REQUIREMENT; CUTS PLATES OR FRAME
MOUNTED STENCILS.
- TRAVEL SIZE UP TO 71”
- ACCURACY BETTER THAN 1um
- REPEATABILITY 0.5um
- LASER WAVELENGTH 1064 NM
GENERAL
- 12,500 APERTURES PER HOUR
- 3 MIL MIN SIZE APERTURE
- FOOT PRINT: LASER 84” X 60” X 65”
- POWER SUPPLY 24” X 24” X 39 ½”
- CONTROL CABINET 24” X 21 ½” X 39 ½”
POWER REQUIREMENTS:
- 120VAC 50/60 HZ 20 AMP and 208VAC single phase 50/60 HZ, 40 AMP.
- CFM REQUIREMENTS: MIN 45PSI
- METAL THICKNESS RANGE: .002 INCHES THROUGH .030 INCHES
- LASER CONVERSION SOFTWARE INCLUDED
CLICK HERE FOR A LIST
OF FREQUENTLY ASKED QUESTIONS
Call Sales at (208) 262-7200 or write us at
info@integratedideas.com for
further information or to place an order.
* AXIS Laser Stencil Command Center® is an exclusive
registered trademark name of Integrated Ideas & Technologies, Inc.
Back to top |
